PPG INDUSTRIES INC,COATINGS & RESINS GROUP -- INT EXT SEALER & PRIMER,77-1  -- 8010-00N010211
<pre>=====================  Product Identification  =====================

Product ID:INT EXT SEALER & PRIMER,77-1
MSDS Date:12/09/1981
FSC:8010
NIIN:00N010211
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC,COATINGS & RESINS GROUP
Address:260 KAPPA DRIVE
City:PITTSBURGH
State:PA
ZIP:15238
Info Phone Num:412-963-5822
Emergency Phone Num:304-843-1300
CAGE:47695
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYL BENZENE  (SARA III)
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: <5%
Other REC Limits:N/K 
OSHA PEL:100 PPM/125 STEL
ACGIH TLV:100 PPM/125STEL 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:VM&P NAPHTHA (LIGROINE)
CAS:8032-32-4
RTECS #:OI6180000
Fraction by Wt: 70%
Other REC Limits:N/K 
OSHA PEL:300 PPM/400 STEL
ACGIH TLV:300 PPM; 9192

Ingred Name:METHYL ETHYL KETOXIME.VAPOR PRESSURE:3 MMHG.
CAS:96-29-7
RTECS #:EL9275000
Fraction by Wt: <0.5%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:REPEATED OVEREXPOSURE TO SOLVENT
    VAPORS MAY CAUSE PERMANENT BRAIN AND NERVOUS SYSTEM
    DAMAGE.INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
    INHALING CONTENTS CAN BE HARMFUL OR FATAL.EYE WATERING,
    HEADACHES,NAUSEA,DIZZINESS,AND LOSS OF COORDINATION ARE INDICATIONS
    THAT SOLVENT LEVELS ARE TOO HIGH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN:PRIMARY IRRITANT.INGESTION:N/K
    .INHALATION:ANESTHETIC,IRRITATION OF THE RESPIRATORY TRACT OR ACUTE
    NERVOUS SYSTEM DEPRESSION CHARACTERIZED BY THE FOLLOWING
    PROGRESSIVE STEPS:HEADA CHE,DIZZINESS,STAGGERING
    GAIT,CONFUSION,UNCONSCIOUSNESS,OR COMA.
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF RUNNING
    WATER FOR AT LEAST 15 MIN.TAKE TO A PHYSICIAN FOR DEFINITIVE
    MEDICAL TREATMENT.SKIN:WASH AFFECTED AREAS WITH WATER.REMOVE
    CONTAMINATED CLOTHIN G.CONSULT A PHYSICIAN.INGESTION:CALL
    MDIMMEDIATELY .INHALATION:REMOVE FROM EXPOSURE.RESTORE
    BREATHING.KEEP WARM AND QUIET.NOTIFY A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:102F,38.89C
Lower Limits:N/K 
Upper Limits:1.0
Extinguishing Media:USE NFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE,DRY
    CHEM OR FOAM) FOR EXTINGUISHING NFPA CLASS II COMBUST LIQUID FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .WATER SPRAY MAY BE INEFFECTIVE.WATER MAY BE
    USED TO COOL CLOSED CONTAINERS TO (SEE SUP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTR TIGHTLY CLOSED.ISOLATE FROM
    HEAT,ELEC EQUIP,SPARKS & OPEN FLAME.CLOSED CONTRS MAY EXPLODE WHEN
    EXPOSED TO EXT HEAT.DO NOT APPLY ON HOT (SEE SUP DAT).

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES,HOT
    SURFACES,AND ELECTRICAL,STATIC OR FRICTIONAL SPARKS).AVOID
    BREATHING VAPORS.VENTILATE AREA.REMOVE WITH INERT ABSORBENT AND
    NON-SPARKING TOOLS.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F,48.89C.STORE
    LARGE QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF
    NFPA CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY.CONTAINERS SHOULD BE GROUNDED
    WHEN POURING.AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.DO
    NOT FLAME CUT,BRAZE OR WELD WITHOUT NIOSH APPROVED RESPIRATORS OR
    APPROPRIATE V ENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL & GENERAL VENT NECESSARY TO KEEP AIR CONC BELOW TLV
    .USE ALSO TO REMOVE DECOMP PROD DURING (SEE SUPP)
Protective Gloves:REQ FOR PROLONGED OR REPEATED CONTACT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K 
Work Hygienic Practices:PREVENT PROLONGED SKIN CONTACT TO CONTAMINATED
    CLOTHING.
Supplemental Safety and Health
FIRE FIGHT PROC:PREVENT PRESSURE BUILD-UP & POSS AUTO-IGNITION OR
    EXPLOSION WHEN EXPOSED TO EXTREME HEAT.IF WATER IS USED,FOG NOZZLES
    ARE PREFERABLE.EXPLO HAZ:SURFACES.HAZ DECOMP PROD:CARBON MONOXIDE.
    VENT:WELDING OR FLAME CUTTING ON SURFACES COATED WITH THIS PRODUCT.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:136-194C
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:>1 (AIR=1)
Spec Gravity:0.84 (WATER=1)
Evaporation Rate &amp; Reference:>1 (ETHER=1)
Solubility in Water:N/K 
Appearance and Odor:LIQUID
Percent Volatiles by Volume:77.27

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
    HEATED TO DECOMPOSITION AS IN WELDING.FUMES MAY CONTAIN:CARBON
    MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT INCINERATE CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.