AMERICAN POLYWATER CORPORATION -- POLYWATER LUBRICANT F -- 6070-00F021926
===================== Product Identification ===================== Product ID:POLYWATER LUBRICANT F MSDS Date:03/01/1987 FSC:6070 NIIN:00F021926 === Responsible Party === Company Name:AMERICAN POLYWATER CORPORATION Address:11222-60TH STREET NORTH Box:53 City:STILLWATER State:MN ZIP:55082 Info Phone Num:(612) 430-2270 Emergency Phone Num:(612) 430-2270 CAGE:61807 === Contractor Identification === Company Name:AMERICAN POLYWATER CORP Box:53 City:STILLWATER State:MN ZIP:55082-0053 Country:US Phone:612-430-2270 / 612-430-3634 CAGE:61807 ============= Composition/Information on Ingredients ============= Ingred Name:WATER, H2O CAS:7732-18-5 RTECS #:ZC0110000 Ingred Name:1,2-PROPANEDIOL (PROPYLENE GLYCOL) CAS:57-55-6 RTECS #:TY2000000 Fraction by Wt: 4.1% Ingred Name:POLYMER, UNSPECIFIED Fraction by Wt: <0.5% ===================== Hazards Identification ===================== Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. Explanation of Carcinogenicity:NONE Effects of Overexposure:EYES/SKIN: IRRITATION. ======================= First Aid Measures ======================= First Aid:SKIN: WASH AREA THOROUGHLY W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS. INGESTION/INHALATION: OBTAIN MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:NO FLASH Extinguishing Media:DOESN'T APPLY. Fire Fighting Procedures:PRODUCT ISN'T FLAMMABLE. Unusual Fire/Explosion Hazard:SEALED CONTAINER CAN BUILD PRESSURE WHEN EXPOSED TO HIGH HEAT. ================== Accidental Release Measures ================== Spill Release Procedures:IT SHOULD BE WASHED, SWEPT OR SQUEEGEED FROM FLOOR USING WET MOPS. OUTSIDE, SPILLS SHOULD BE COVERED W/SAND, DIRT, GRAVEL OR CALCIUM CHLORIDE. PRODUCT IS VERY SLIPPERY. SPILLS & CLEAN THEM UP IMMEDIAT ELY WHEN THEY OCCUR. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP PRODUCT CONTAINERS CLOSED WHEN NOT IN USE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NONE REQUIRED Ventilation:NORMAL IS ADEQUATE Protective Gloves:IMPERMEABLE Eye Protection:SAFETY GLASSES Supplemental Safety and Health PRODUCT BOILS AT 212F. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:212F Vapor Pres:18 Vapor Density:0.9 TO 1.1 Spec Gravity:1.01 pH: 7.5 Solubility in Water:COMPLETE Appearance and Odor:SLIGHTLY OPAQUE, ORANGE-COLORED, STRINGY LIQUID W/FAINT CHARACTERISTIC ODOR. Percent Volatiles by Volume:96.2% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES CONTACT W/MATERIALS WHICH REACT W/WATER. OXIDIZING AGENTS SUCH AS HOUSEHOLD BLEACH. Hazardous Decomposition Products:POTENTIALLY CO, CO2 ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. FOR WASTE DISPOSAL PURPORSES, POLYWATER F ISN'T DEFINED OR DESIGNATED AS HAZARDOUS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.